This Pyle marine speaker system has everything you need to blast tunes at sea, including two pairs of 6.5-inch, two-way speakers; a 4-channel waterproof power amp; a waterproof iPod/MP3 adaptor; and a waterproof poly bag. The speakers feature high quality-polypropylene cones and 200 watts peak power to match the PLMRMP3A amp's output. The amp also includes an electronic crossover network, should you choose to expand your speaker system. The amp takes high- and low-level inputs, as well as an RCA line level input--so you can hook up your MP3 player using the included MP3 adaptor. And when things get wet, keep it safe in the included waterproof poly bag. Also includes a wired remote control for total control of your music from another spot on your vehicle.
The PLMRMP3A packs a surprising 200 watts max (at 4 ohms) for each of its four channels, surprising for an amplifier of its size--just 6.10 x 3.35 x 1.38 inches.
The PLMRMP3A takes RCA line inputs and includes a 3.5mm-to-RCA adaptor, so you can plug in your MP3 player or iPod easily, for a quick and easy music solution. It also takes standard high- and low-level inputs from marine head units, so it can be used for system expansion. A simple two-way switch gets your input level set up for either option.
For safety, this amp is equipped with power protection circuitry. An anti-thump turn-on and soft turn-on prevent any damage to your speakers.
This amplifier also includes a wired remote control, for adjusting volume gain.
Two pairs of Pyle two-way marine speakers are also included, for a complete audio setup.
The speakers are constructed with high-quality polypropylene cones and suspension cloth surrounds, boasting 200 watts peak power and a white plastic enclosure to match most marine environments. Two-inch polymer cone tweeters take up the high-end.
| Pyle PLMRMP3A Marine Power Amplifier | |
|---|---|
| Power Rating: | 4 x 100 Watts RMS at 4 Ohms 4 x 200 Watts Max at 4 Ohms 4 x 300 Watts RMS at 2 Ohms |
| T.H.D: | < 0.05% |
| S/N Ratio: | > 95dB |
| Channel Separation: | > 65dB |
| Frequency Response: | 10Hz- 40kHz |
| Fuse: | 10A |
| Dimensions: | 6.10 x 3.35 x 1.38 Inches (L x W x H) |
| Speakers | |
| Size: | 6.5 Inches |
| Tweeter: | 2-Inch Polymer Cone Tweeter |
| Power Handling: | 200 Watts RMS / 400 Watts Peak |
| Frequency Response: | 80-20KHz |
| Impedance: | 8 Ohms |
Pyle PLMRMP3A Four-Channel Waterproof MP3/iPod Marine Power Amplifier, Two Pairs 6.5-Inch 2-Way Marine Speakers, Waterproof 3.5mm Stereo to RCA Adaptor, Remote Control for Volume Gain, Waterproof Poly Bag for iPod/Mp3 Player, Documentation
The Uniden MHS125 handheld Marine radio meets the tough JIS8 submersible specification, and is packed with handy features like an emergency strobe light, all marine channels, NOAA weather alert, Dual and Triple watch, memory channel scan, instant access to emergency channels 16 or 9, and an adjustable transmit output power to maximize battery life. Uniden has also designed the MHS125 to float so that a radio overboard is not a radio lost.
The MHS125 covers all USA, International, and Canadian marine channels, keeping you up-to-date with all the latest marine activity.
This radio comes preprogrammed with NOAA weather channels. The Emergency/Weather Alert allows it to function as a severe weather warning radio and will also alert you to any local or national emergencies. If the NOAA issues warning while this feature is turned On, the radio sounds an alert tone. You will then hear the emergency/weather broadcast.
Triple Watch mode monitors channels 16 and 9 for a signal while you listen to the currently selected channel. The marine radio checks channel 16 and 9 for activity every 2 seconds.
These different watch modes let you monitor up to two Coast Guard Distress/Hailing channels and one weather channel along with one regular marine channel.
Automatically scan your programmed channels with Memory Channel Scan. Scanning starts from the lowest to highest channel and stops when it finds an active channel. It remains on that channel until the transmission ends, then resumes scanning after a two-second delay period.
Uniden MHS125 VHF Hand Held Radio won't give up no matter how wet it gets. Whitecap splash, gusty spray, tidal wave, whatever, this radio can take it. The Uniden MHS125 2-way Marine Radio is built rugged to take the rigors of being out on the water, day in and day out with a full JIS8 waterproof rating. It also features a floating design, and is submersible for up to 30 minutes at five feet.
Select between 1, 2.5, and 5 Watts for short- and long-range communication--this is also a convenient way to save a little battery life. In most situations, the 1 Watt transmission power is all you need. If you find yourself far away from other stations and have trouble getting a response, you may need to boost the transmission power from 1 Watt to 2.5 Watts or 5 Watts
The MHS125 ships with a rechargeable Lithium Ion battery pack, which can be conveniently charged in the included drop-in charger. Also included is a an alkaline battery case, so you can keep Alkaline AA batteries handy as an emergency backup. The radio gets about 12 hours of life from a single charge.
The MHS125's large, easy-to-read backlit LCD display and backlit keypad make it easy to use, day or night.
The MHS125 is backed by a three-year warranty.
Uniden MHS125 Radio, Antenna, AC Adapter, DC Adapter, Charger, Rechargeable Lithium Ion Battery, Beltclip, Wrist Strap, Mounting Screws, Alkaline Battery Case, Documentation
display, echo 100 brings a new level of fishfinding capability to the budget-minded buyer. Thanks to Garmin’s exclusive HD-ID target tracking technology, you’ll see enhanced separation and definition of images on echo 100’s fast refreshing, 4 in grayscale display. The single-beam (200kHz) transmitter with 100 watts (RMS) of sonar power lets you scan to depths of up to 600 ft – ample for most freshwater lakes.
echo 100’s compact design makes it the perfect companion for even small craft. Plus, its quick-release tilt mount and versatile 
Built on the strong foundation of Pioneer's high-performance SPL subwoofer, Champion Series subs deliver reliability and power, for producing big, clear, distortion-free sound to hold up against any other subs in their class. The 12-inch TS-W309S4 pumps out 1400 watts of maximum power, with a 4-ohm impedance.
An extremely durable, yet lightweight cone is vital to prevent cone failure at high sound pressure levels. Pioneer's New IMPP Composite Seamless Cones meet this need perfectly while delivering accurate yet powerful bass.
Another world's first from Pioneer. Dramatically improves durability and lightness for superior response, especially for louder volume.
A speaker cone is essential for air to vibrate and carry sound to listeners' ears. Our new Champion Series subwoofer cones have 14% more surface area than conventional subwoofer cones, for louder, better bass reproduction.
Pioneer offers single voice coil (TS-W309S4) and dual voice coil (TS-W309D4) 12-inch designs. The Dual 4 ohm subwoofer has the flexibility to be wired at 2 or 8 ohms, to get the most from the amplifier. To simplify installation even further, all speaker terminals have been placed on one side of the subwoofer rather than on opposite sides.
The movement of air within the subwoofer is smoothly channeled for optimal ventilation to ensure a quick response and clear reproduction of bass.
| Subwoofer Size: | 12" |
| Max. Music Power (Nominal) | 1,400 W (400 W) |
| Frequency Response: | 20 Hz to 220 Hz |
| Sensitivity (1 W/1 m): | 94 dB |
| Impedance: | 4 ohms x 1 |
| Mounting Depth: | 6" |
| Cut-Out Dimensions: | 11-1/8" |
| Recommended Enclosure: | 0.85 to 1.75 cu. ft. |
Pioneer TS-W309S4 Champion Series 12-inch Subwoofer, Installation Hardware, Documentation
